Bitronics D650 Master Display

Easily Display Measurement Values from Any Substation IED

Connects with DNP or Modbus Over Ethernet or Serial

The Bitronics D650 Master Display connects easily to any substation IED via DNP or Modbus TCP Master (Serial or Ethernet) to display measurement values residing in those IEDs.

The D650 Connected to an OrionLX

The D650 Connected to an OrionLX

Key Features

  • Connects to OrionLX/LXM, Bitronics transducer, or any other IED
  • Full set of measurement values are supported, any measurement available in the Bitronics M650M3 meter using Bitronics standard scaling can be displayed.
  • Supports Modbus RTU, DNP3 Serial or Modbus/DNP3 TCP Master protocol
  • User can select registers/points in any desired sequence
  • Option to use in serial display mode so one model can serve as Master or can be used to receive signals from Bitronics M87x or PPX II in existing installation

Specifications

D650 Master Display Dimensions

Dimensions: 4.5” (w) x 4.5” (h) x 6.5”(d)

Weight: 1.8 lbs.

Power Supply: Universal 48-250V dc/55-240V ac nominal

Outputs:

  • Optional Configurable RS-232/RS-485 port , configurable from 9600bps to 115.2kbps
  • Standard RJ45 10BaseT/100BaseTX port for service port functions, optional Modbus or DNP3 TCP/IP support

Environmental:

  • Operating temperature range -40° to 70°C,storage temperature -40° to 85°C

  • Humidity 0-95% non-condensing

  • Surge withstand to ANSI/IEEE C37.90.1: 2002

  • UL/CSA Recognized, File Number E164178, CE Marked

Web-based Configuration

 

  

    D650 Master Display Web-based Configuration

    October 15, 2018 – October 18, 2018 Spokane Convention Center

    Western Protective Relay Conference

    Please join NovaTech at The Western Protective Relay Conference (WPRC) at the Spokane Convention Center in Spokane Washington October 15-18 to hear from and network with industry professionals on broad and detailed technical aspects of power system protection.

  • Bitronics Pole Top Power Monitor Cabinet

    The Poletop Power Monitor cabinet from NovaTech uses a Bitronics M660 meter in a custom enclosure connected to Lindsey (or other) sensors to provide peak fault current, definite time overcurrent relay element, and end-of-line voltage monitoring for FLISR and other DA applications. Learn more at https://www.novatechweb.com/substatio…

    April 3, 2018

  • NovaTech Utility Systems and Services

    Almost half of NovaTech’s business is in Systems and Services including web page design, panel design, math and logic development, Orion configuration, and onsite installation and commissioning. Mark Matassa explains how our engineers can work with you to reduce project execution time at the 2016 DistribuTECH Conference and Exhibition in Orlando, Florida.

    March 18, 2016

  • Bitronics: A Century of Innovation

    Bitronics Measurement and Event Recording products have been used throughout the US electric utilities and internationally in traditional and cutting-edge “Smart Grid” applications. The products have been made in Bethlehem, PA, USA since 1908 and continue to be the gold standard for reliability and innovation in the electric utility substation measurement market.

    June 4, 2012

Your browser is out-of-date!

Update your browser to view this website correctly.Update my browser now

×