Documentation Library


  • Distributed Combination I/O Datasheet  

    The rugged Distributed Combination I/O module (DCIO) provides eight isolated analog inputs – 300V dc channel-to-channel – as well as eight isolated discrete inputs and outputs.

    March 27, 2020

  • OrionLX™ Datasheet  

    The OrionLX Substation Automation Platform is designed with a Linux operating system, more powerful processors for an expanded range of substation automation applications, and comprehensive Cyber-Security functions for meeting NERC CIP requirements.

    April 4, 2018

  • OrionLX™ Multimedia Board  

    An optional Multimedia Board is now available on the OrionLX. This new expansion module includes the following ports:
    a. 15-pin D-Shell VGA port.
    b. Third Ethernet port (ETH2)
    c. One audio port.
    d. Two USB ports (USB4 and USB5).

    October 2, 2017

  • OrionLX Tile Annunciator  

    The OrionLX Tile Annunciator is a web-based software-defined alarm annunciation product. The Tile Annunciator
    webpages are served directly from an OrionLX automation platform and provide simplified setup, categorization
    and viewing of active and acknowledged alarms in substation HMI and web-based SCADA applications.

    October 16, 2015

  • OrionLXm Discrete I/O Datasheet  

    A discrete I/O module is now available for the OrionLXm. This module offers 12 inputs in two groups of six, plus two Form A (NO) outputs and two Form C (NO/NC) outputs.

    January 23, 2015

  • VGA Touchscreen Monitor for OrionLX  

    A rugged VGA Touchscreen Monitor is available for the OrionLX™. Features include:
    • Viewable area: 19”
    • Brightness: 300 cd/m2
    • Contrast ratio: 700:1
    • Viewing angle: V/H 80°/75°
    • Response time: 8ms
    • Pixel pitch: 0.294mm
    • Maximum resolution: 1280 x 1024
    • Input power: 125V or 48V dc
    • 19” Rack-Mount or Panel-Moun

    May 3, 2012

  • OrionLX™ Relay Helper  

    NovaTech currently provides over 200 pre-engineered SEL® “point pick lists” (or “Default Files”) to simplify the process of selecting points from SEL® relays. When new SEL® relay model variations are introduced, NovaTech Engineering, or the user, creates a new Default File for that specific new relay model.

    February 21, 2012

  • High Performance OrionLX CPU  

    The optional OrionLX High Performance CPU provides two to three times more speed and processing power than the standard OrionLX CPU. It is intended for larger automation applications, notably transmission substation applications with large SCADA databases, extensive math and logic, many webpages and encryption and other security features implemented.

    January 2, 2012

  • Orion5 Datasheet  

    The Orion5 Automation Platform interfaces with Intelligent Electronic Devices (IEDs) using their legacy or industry standard protocols. Information is shared between IEDs, RTUs, PLCs, DCSs, HMIs, and SCADA masters. The Orion5 enables utility engineering, operations, planning personnel, neighboring utilities, state power pools and regional transmission groups to share critical information.

    October 12, 2010

  • Distributed Discrete I/O Datasheet  

    The rugged NovaTech Distributed Discrete I/O Module (DDIO) can help reduce wiring and costs in substation monitoring and control applications. Its hardened design, small form factor, and distributed communications capability allow it to be installed virtually anywhere in the substation.

    August 2, 2010

  • PRP Redundant Ethernet for OrionLX™  

    Parallel Redundancy Protocol or “PRP” is a field-upgradeable Ethernet network resilience solution available on the OrionLX with the High Performance “CPX” CPU. With PRP, Ethernet messages are transmitted over two parallel network paths. If either network fails, the message still gets through without delay. PRP is also protocol independent making it an excellent choice for enhancing existing automation designs.

    November 4, 2015