Documentation Library

Application Notes

  • NovaTech Orion I/O Application Note  

    NovaTech Orion I/O™ is an extension of the family of OrionLX™ Automation Platforms for substation automation and incorporates the same security features, software tools and “NCD” configuration as the OrionLX. It is a rack-mountable I/O assembly with four slots—A, B, C, and D—that can be filled with any combination of I/O cards: currently 16-Point Discrete Input Card,

    September 14, 2020

  • PRC-002-2 Compliance Using Bitronics® 70 Series Recorders  

    The North American Electric Reliability Council (NERC) has defined standards for disturbance monitoring and reporting requirements for transmission and generation systems. The primary standard is the recently approved PRC-002-2 which replaced PRC-002-1 and PRC-018-1. PRC-002-2 establishes requirements for installation of Disturbance Monitoring Equipment (DME) for the purpose of obtaining data to facilitate analysis of Bulk Electric System (BES) disturbances.

    September 16, 2016

  • Network Instruments Application Note  

    Bitronics Network Instruments interface with a wide variety of devices including Remote
    Terminal Units (RTUs), Programmable Controllers, and personal computers. This application note describes the interface to a HARRIS D20 RTU using either RS-232 or RS-485 DNP3Bitronics instruments. These instruments allow the D20 RTU to collect high-accuracy 3-phase electrical quantities.

    November 11, 2009

  • 50 Series Loss Compensation Application Note  

    Calculate the settings required to configure an M650 so its power and energy measurements represent the power and energy at some Point of Delivery, other than the location where the meter is actually connected, compensating for losses between the two points.

    July 20, 2013